Replacement Lead Landing Gear Leg Recommendation for 2013 Montana High Country Model 343RL

Question

Question:

I have a 2013 Montana High Country model 343RL with a GVW of 12500. I need to replace the drivers side lead jack on the landing gear, I have 17.5 inches between stops 2.5 inches square and an outside tube measurement of 29.25 inches without dust cap, most of what Ive seen is 29.5 inches, not sure if its an issue but thought I would ask. Looking for the best product to replace it with, any help would be greatly appreciated. Couple pictures attached.

asked by: Bernie C

0

Expert Reply:

The correct replacement lead leg you'll need is the part # LG-179013. This matches the dimensions you listed and is designed to fit as replacement for the Lippert landing gear jacks like yours as well.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at Stromberg Carlson and the Replacement Lead Jack with Drop Leg, #LG-179013, is the same part as the Lippert Universal Fit Lead Landing Gear, #179013. The only difference between the two products is that they are sold through…

view full answer...

Answer 2

I can give you some information to help you determine if the Lead #LC179013 and Follow #LC179014 legs will fit your 2004 Arctic Fox 29.5E 5th wheel, but we don't really have a database to pull from when it comes to OEM part numbers on trailers.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

To determine the best landing gear option for your 1997 Forest River Sierra you'll need to measure the where your weld-stops sit to see if there is a matching set so that you can swap over without having to cut off the old mounting brackets and…

view full answer...