Does Lippert Solera Awning Hardware Kit LC351825 Include Mounting Brackets

Question

Question:

does this include the brackets that actually connect to the trailer that the arms fold into

asked by: Mary

0

Expert Reply:

Lippert part # LC351825 is a set of replacement arms, crank heads, crank rod and fasteners. The crank heads have mounting brackets which are shown in the linked photo.

This kit does not include the awning rail # LC715217 that mounts to the side of the RV nor the awning fabric/roller like # LCV000231492.

expert reply by: Adam R

0

click to enlarge

Answer 1

We have a Lippert Components replacement slide motor that will work with the Schwintek system. It is the Lippert In-Wall RV Slide-Out Motor #LC236575. It is a gear ratio of 300:1.

view full answer...

Answer 2

I passed on your message and picture to Lippert to try and determine what the correct replacement slide out motor you'd need and they told me you will need the #LC236575 that you referenced and that you'll have to replace both sides at the…

view full answer...

Answer 3

The Replacement LED Light Strip for Solera RV Awning part #LC423331 is .394" wide so you will need to have this much space inside the channel for it to mount but I suspect it would indeed work. If you wanted to be certain however you could just…

view full answer...

Answer 4

I went out to our warehouse to take a look at the Replacement LED Light Strip #LC423331 that you referenced. The light strip itself is extremely thin so it's going to pretty much fit inside any housing that's designed for this purpose. I also…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Sorry Jennifer, I am a bit confused as you were looking at the Replacement U-Clamp Bracket #RM-B141 which mounts with bolts and not U-bolts. This part works with the Split Bushing #RM-205217-10 for the discontinued Roadmaster Front Anti-Sway Bar…

view full answer...

Answer 11

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 12

Hi Joe, The Blue Ox Base Plate Kit #BX1139 is a confirmed fit for your 2024 Jeep Wrangler Rubicon X per Blue Ox. I don't currently have an installation video on a model with a steel bumper but I did measure from the mounting holes down to the…

view full answer...