Compatibility of Adarac Pro Aluminum Rack A4000947 with BAKFlip MX4 BAK48328 on 2016 F-150 8-ft Box

Question

Question:

Compatibility of Adarac Aluminum Pro with Bakflip MX4 on 2016 F150, 8ft box Basically, the subject line says it all. Will the Adarac Aluminum Pro series rack fit on my 2016 F150 with an 8 foot box and a Bakflip MX4 hard tonneau? The product page for the rack shows the following: Not Confirmed to Fit 2016 Ford F-150 Also, can I obtain additional parts cross bar and slider nuts through you?

asked by: John

0

Expert Reply:

The Adarac Pro Aluminum Ladder Rack # A4000947 is a confirmed fit for your 2016 Ford F-150 with 8-foot bed, but please note the similar rack # A4000966 that you referenced fits only F-250, F-350 and F-450 long bed pickups.

Yes, this ladder rack # A4000947 is compatible with the BAKFlip MX4 tonneau cover for your F-150, part # BAK48328, since the rack and cover do not use the same installation points. The Adarac installs on the bed rails while the BAKFlip installs inside the bed rails. Please see the linked photo showing the Adarac installed along with a hard folding tonneau cover. A video is linked as well.

Replacement parts and accessories are available from Adarac or etrailer. We currently offer Load Stop Kit # A4000880 and Tie Down Kit # A4000882 and my contact at Adarac confirmed they offer all replacement parts not offered through retailers.

expert reply by: Adam R

0

click to enlarge

Answer 1

The Adarac Pro Series Custom Truck Bed Ladder Rack part #A4001015 is the perfect ladder rack to use with the BAKFlip G2 Hard Tonneau Cover part #BAK26101 on your 2012 Chevrolet Silverado 1500 with the 6-1/2' bed. It is also the only ladder rack…

view full answer...

Answer 2

Tonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them. As an example, the…

view full answer...

Answer 3

The Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500lbs Item #A4000946 is compatible with your BAK tonneau cover and will fit your 2019 Ford F-150.

view full answer...

Answer 4

The only tonneau covers that come with rails that have T-Slots are retractable like the RetraxONE XR #RTX47XR that fits your 2022 Toyota Tundra with the 6-1/2' bed. With that being said, we do have folding covers like the BAKFlip MX4 #BAK48410T…

view full answer...

Answer 5

I do have some options for you but the Thule TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-508 and the BAKFlip MX4 Hard Tonneau Cover part #BAK48329 are not a good fit. The rails on the SR are rather wide so they would likely overlap with…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...