Can Bike with Fenders be Carried on Jack-It 2 Bike Rack

Question

Question:

Will the Jack It 2 work with bikes with fenders?

asked by: Craig

0

Expert Reply:

As long as you could fit the rubber strap for the wheels of the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 between the fender and the tire this rack would work fine with fenders.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes the Jack-It 2 Bike Rack for A-Frame Trailers, #LC429756 will work with fat tire bikes. Please see the attached video for product review and mounting to provide a good visual of the installation and use of this bike rack. Don't for get to get…

view full answer...

Answer 2

Basically, in any state in the union, if the rear license plate or lights are obscured in any way, a police officer can pull you over, regardless of the specific verbiage of the laws. Beyond that it is just a good idea to add lights for safey. For…

view full answer...

Answer 3

You can tap into the trailer's wiring at the rear of it to add a 4-way. We have the kit part #18252 which comes with everything you'd need so it would be what I recommend. It comes with the circuit tester plus the quick splice connectors…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Can Bike with Fenders be Carried on Jack-It 2 Bike Rack

Featured Help Information

Miscellaneous Media

Continue Researching