Does Demco Base Plate for 2018 GMC Sierra Require Removal of Front Grille and Bumper

Question

Question:

Do you have to remove entire grille to install base plate? Also, can I use my current Blue Ox tow bar with the base plate?

asked by: Glenn K

0

Expert Reply:

Yes, the bumper and front fascia of your 2018 GMC Sierra 1500 does need to remove to install the Demco Base Plate kit part # DM9519330. Then to use this base plate kit with your Blue Ox tow bar you'd just need the part # DM9523127 and you'd be set.

To see the entire install process for the Demco base plate kit check out the attached install instructions to this page.

expert reply by: Jameson C

0

Answer 1

To flat tow your 2023 GMC Sierra 1500 you will ultimately put it in park but there are a number of steps you need to take to get there so you'll need to consult your owner's manual (starting on page 406) to walk through all of the…

view full answer...

Answer 2

I took a look at the online owner's manual and on pages 268 - 269 it says that your 2016 Ford F-150 Super Cab with the 2.7L EcoBoost has a max trailer weight rating of 5,100 lbs. This means that you will be able to easily tow your trailer that…

view full answer...

Answer 3

When installed, the EcoHitch #EH59FR front receiver will sit in the middle of the front bumper, between the tow hooks as shown in the photo I've provided for you. With the receiver sitting in the middle of the bumper, you won't need to worry…

view full answer...

Answer 4

According to the owners manual for your 2021 GMC Sierra 1500, disconnecting the battery is the only option to prevent the electric parking brake from activating when you flat tow your truck. We have the Battery Disconnect #RM-766 for gas engines or…

view full answer...

Answer 5

Hey Richard, we do have replacement covers for the Demco base plate kits like the part #DM9519330 with the part #DM15675.

view full answer...

Answer 6

Okay Bob, so I did a bit of digging around and apparently this is a known issue that Blue Ox is aware of. The 41" distance between the mounting points is too wide and non-standard which is why your tow bars are being stretched too far.…

view full answer...

Answer 7

Yes, you will have to drill holes in your lower fascia to attach the plug mount that is included with the Demco Tabless Base Plate Kit #DM77YV. This is a main reason I prefer to use the Roadmaster Direct-Connect Base Plate #RM97RR as they include…

view full answer...

Answer 8

To flat tow your 2010 Chevy Silverado 1500 you will need to first start with a base plate kit. For that the most popular option is the Roadmaster #3154-3. In addition to the base plates, you will also need a compatible tow bar, safety cables,…

view full answer...

Answer 9

The 2020 Chevy Colorado 4x4 can be flat towed. The 2wd version cannot. The owners manual on page 300 states to " Only dinghy tow four-wheel-drive vehicles that have an N (Neutral) and a Four-Wheel Drive Low (4 (n) setting." On the dial you…

view full answer...

Answer 10

From the research I did you would need to install a lube pump in order to flat tow your 2008 Chevy 1500. However, you will need to go by what is in the owners manual of your vehicle as the final authority, or you can contact a Chevy dealership for…

view full answer...

Answer 11

We have the correct fit for your Dexter electric brake assemblies k23-466-00 and K23-467-00 (Canadian) replacements meeting US standards. You will use the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 6K…

view full answer...

Answer 12

Yes, the Curt Front Mount Trailer Hitch #C87FR that you referenced is confirmed to fit and will work perfectly on your 2019 Ram 1500 Tradesman Short Bed without the factory tow hooks. This is a custom hitch that's designed to line up to existing…

view full answer...

Does Demco Base Plate for 2018 GMC Sierra Require Removal of Front Grille and Bumper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching