Will the Rhino-Rack 2 Kayak Carrier S512-S512X Fit the Rola Haul-Your-Might T3 Ladder Rack

Question

Question:

Will this item fit on the rola t3 ladder rack item #59799

asked by: Paula P

0

Expert Reply:

Yes, the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs part # S512-S512X will fit the Rola Haul-Your-Might T3 Truck Bed Ladder Rack part # 59799. The Rola Haul-Your-Might T3 uses the same crossbars as the Rola Roof Racks which are a standard size so you should not have any issues at all using the two together. The Rhino-Rack 2 Kayak Carrier also comes with tie-down for both kayaks so you will be ready to go once you get setup. The other great thing about the Rhino-Rack 2 Kayak Carrier is that it saves space so you will have room for other items.

expert reply by: Conner L

0

Answer 1

I confirmed with my contact at Rhino-Rack that, yes, the 100mm width and 36mm depth shown in the attached photo from the installation manual is the maximum dimensions of crossbars that the brackets of the Rhino-Rack 2 Kayak Carrier #S512-S512X can…

view full answer...

Answer 2

Since the factory crossbars of your 2001 Nissan Xterra are much thicker than standard crossbars you'll have to install a roof rack to the roof of the vehicle so that you can carry the Rhino Rack Carrier part #S512-S512X that you referenced.…

view full answer...

Answer 3

For a kayak carrier that fits the channel of your Thule Evo Wingbar crossbars, I would look into the Lockrack Adjustable XL Watersport Carrier #LR54FR. You do not need any other hardware or adapters. This carrier is very versatile and does not…

view full answer...

Answer 4

Inno makes a great roof rack solution for your vehicle. You might be more familiar with names like Thule or Yakima, but Inno is very well known on the west coast for making high quality roof racks at reasonable prices. You can construct a roof rack…

view full answer...

Answer 5

While we do have a great option for your Thule T-Rac Pro2 ladder rack on your 2017 Toyota Tacoma, I confirmed that the Rhino-Rack 2 Kayak Carrier #S512-S512X does not clamp around the bars of the rack. This is because the bars of the T-Rac Pro2 are…

view full answer...

Answer 6

So I believe what you are saying is you have a Thule ladder rack on your Tundra and want to add a J-style kayak carrier. We do have an option for you that will work, but you are right that the crossbars are too wide for the clamp-on hardware of a…

view full answer...

Answer 7

If your J-style kayak carrier clamps are too small to fit around the Thule Xsporter Pro Ladder Rack then you will likely need a new kayak carrier, unless there is an option to use T-bolts to install the kayak carrier into the Xsporter crossbar…

view full answer...

Answer 8

As long as the combined weight of your two kayaks is less than 165 lbs the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs #S512-S512X it can carry two 13 foot long kayaks.

view full answer...

Answer 9

Yes, the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs part #S512-S512X will work perfectly with any of the Thule WingBar Evo Crossbars like part #TH711420 for example. For future reference, the Rhino-Rack 2 Kayak Carrier will work with crossbars from most…

view full answer...

Answer 10

The correct replacement c-clamp which is the part that holds the base to the bed rail on the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part #TH500XT is part #8523159001. If you need the bolt that holds the c-clamp in place you will…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...