Drop Shank for Weight Distribution System that Fits 2-1/2 inch Hitch in 2019 Ford F-250

Question

Question:

Is the curt c17123 shank available with a 2-1/2inch shank to go in receiver hitch? It would still need the 2inch vertical drop. My new truck is class 5 receiver 2019 F-250. Old truck was class four with 2inch receiver. Thanks!

asked by: Terry B

0

Expert Reply:

For a drop weight distribution shank that fits a 2-1/2 hitch similar to the Curt # C17123 you'd want the Curt shank part # C17132 which can do a drop of 9-1/4 inches. The weight capacities for this are 1,500 lb tongue weight and 15,000 lb total trailer weight. I attached a review video for this shank for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Don't worry, I can help explain how you will need to adjust your weight distribution system for the best tension. First thing to know is that there is no particular set amount of bar tension that is standard for all vehicles. It will depend on…

view full answer...

Answer 2

We do have drop shanks for weight distribution systems that will fit your 2-1/2 inch hitch and allow you additional drop like you are wanting. For that we have the Curt part #C17132 which can do a drop of up to 9-1/4 inches, fits your hitch, and also…

view full answer...

Answer 3

I have exactly what you need for your 2018 Ram 2500. For this, I recommend the Curt Weight Distribution Shank part #C17132 which has a 2-1/2" shank that offers up to an 9-1/4" drop. According to the measurements you provided, you will need…

view full answer...

Answer 4

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…

view full answer...

Answer 5

If your truck and hitched camper are level after you have installed your Husky Center Line Weight Distribution hitch #HT32218 then it sounds like you did the install correctly. If you need more clearance between the trailer coupler and the truck you…

view full answer...

Answer 6

The sag you are experiencing when towing with your 2020 Ram 2500 is normal due to the weight that has been added to the rear of your truck, but you definitely want to add rear suspension enhancement to even it out. The reason is, with the sag, the…

view full answer...

Answer 7

There are going to be three of the SumoSprings helper springs available for your 2022 Ram 2500. SumoSprings Rebel #SS27GR SumoSprings Solo Yellow #SSR-312-54 SumoSprings Solo Black #SSR-312-47 The Rebel springs will have the highest weight capacity…

view full answer...

Answer 8

Yes, when the electric signal is sent from the Tekonsha Prodigy P3 Trailer Brake Controller #90195 to the trailer's brakes, it should cause both sides to lock up. Since only one side is locking up, it could indicate that one brake assembly needs…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Drop Shank for Weight Distribution System that Fits 2-1/2 inch Hitch in 2019 Ford F-250

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching