Could Yakima Crossbars be Used with SeaSucker Roof Rack # 298-SX6000B

Question

Question:

Since I have collected many Yakima rack parts over the years, I have several crossbars which I believe will fit this system. Can I purchase part # 298-SX6000B without the crossbars? If so, what would be the cost? This would be used on a 2010 Tacoma Dbl Cab and a SnugTop fiberglass camper shell. Thanks,

asked by: Josh D

0

Expert Reply:

Yakima round bars are actually slightly smaller in diameter than what comes with the SeaSucker roof rack kits like the part # 298-SX6000B you referenced. The SeaSucker bars are 1-1/4 inch thick whereas Yakima bars are 1-1/8 inch thick. This means you wouldn't be able to use Yakima bars with this roof rack.

expert reply by: Jameson C

0

Answer 1

I reached out to a representative of Yakima who told me that for the 1-1/4 inch diameter round crossbars of a SeaSucker roof rack like the #298-SX6000B, the Universal MightyMounts for Yakima Roof Mounted Accessories #Y03590 will fit around them.…

view full answer...

Answer 2

The Yakima LoadStop Brackets for Yakima Roof Rack Crossbars #Y05000 are designed to work with the 1-1/8" diameter Yakima round bars like part #Y00408 and the SeaSucker Monkey Bars Roof Rack - 48" Long #298-SX6000B are…

view full answer...

Answer 3

The outer diameter of Yakima round crossbars such as #Y00411 is 1-1/8 inches.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's…

view full answer...

Answer 10

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads…

view full answer...

Answer 11

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 12

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Could Yakima Crossbars be Used with SeaSucker Roof Rack # 298-SX6000B

Product Page this Question was Asked From

Continue Researching