Trailer Hitch That Fits 2015 Winnebago Trend

Question

Question:

Hi, I want to tow a 1900 lbs car with my 2015 Winnebago Trend which tows 2000 lbs. it’s has an beam frame with outside edge 55 inches and inside 44 inches. Your website my vehicle feature gave this hitch receiver as an option. Would this receiver work? And can I add skid wheels to it? Thanks

asked by: Jim

0

Expert Reply:

We have a trailer hitch that does fit your 2015 Winnebago Trend based on the dimensions you listed but since your frame is 55 inches from outside to outside the part # C13702 won't fit as it's max width is 51 inches. Instead you'd want the Curt # 13703 which fits up to a 72 inch wide frame width.

This hitch also has a capacity of 3,500 lbs which would be more than enough for your application.

expert reply by: Jameson C

0

Answer 1

Yes, the Curt 70108 base plate kit #C28FR that fits your 2022 Chevy Equinox does work with models that have the lower shutters.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables,…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

Hey Michael, The Falcon 5250 has direct-connect attachment points that hook onto a crossbar, if you remove the crossbar adapter then you'll be able to go with a direct-connect baseplate like the #RM77ZR (models with tow hooks) or #RM76RR (models…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 10

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 11

It sounds like you have a 7-way blade connector on your boat trailer as that is a very common connector on boat styles. This connector has 6 pins around the outside of the connector and a center pin for a total of 7. Part #A7WCB would be what a 7-way…

view full answer...