Spare Tire Cover Recommendation for Size 255/70R18

Question

Question:

What size do I need if my tire is 255/70 R18

asked by: Donna C

0

Expert Reply:

The overall diameter of your 255/70R18 tire is 30.4 inches. Our most popular tire cover for tires this size is the Rampage # RA773201 which fits tires between 30 and 32 inches in diameter.

expert reply by: Jameson C

0

Answer 1

I don't have vehicle specific information that would allow me to definitively say that the carrier would allow the rear hatch to open fully, but I can certainly help you figure it out. To determine if you'll have clearance,…

view full answer...

Answer 2

Your 255/70R18 tire has an overall diameter of just over 32 inches and a width of 10 inches. With these measurements in mind, I recommend looking at the Classic Accessories Universal Fit Spare Tire Cover #052963753875. This black, vinyl fabric…

view full answer...

Answer 3

Your 225/75R16 spare tire measures about 29.3" in diameter. For that size tire the Rampage Spare Tire Cover for Jeep part #RA773215 that you looked at would be my choice. The next size down part #RA772901 is rated for up to a 29" tire and I…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 6

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 7

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

Answer 12

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

view full answer...

Spare Tire Cover Recommendation for Size 255/70R18

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching