Recommended Cover for 255/70R18 Spare Tire

Question

Question:

What size tire cover would fit a 25570R18 tire

asked by: Connie

0

Expert Reply:

Your 255/70R18 tire has an overall diameter of just over 32 inches and a width of 10 inches. With these measurements in mind, I recommend looking at the Classic Accessories Universal Fit Spare Tire Cover # 052963753875. This black, vinyl fabric cover is designed to fit over tires that have diameters between 30 inches and 33 inches. The elasticized back hem with quick connect clips allow for a fast and adjustable fit.

I have attached a short video demonstration on this product as well as a link that will take you to our available selection of tire covers designed to fit 32 inch tires.

expert reply by: Chris R

0

Answer 1

The overall diameter of your 255/70R18 tire is 30.4 inches. Our most popular tire cover for tires this size is the Rampage #RA773201 which fits tires between 30 and 32 inches in diameter.

view full answer...

Answer 2

Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but…

view full answer...

Answer 3

The power circuit for each leg of the Lippert Ground Control leveling system #LC358590 is protected by a 35 amp fuse. That means that at most the entire unit could draw up to 140 amps at a time. Realistically it would probably be considerably less…

view full answer...

Answer 4

In order to replace the Advent Analog Wall Thermostat ACTH11 you'll need the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners part #ACRG15. This is a digital style replacement which is what you'll need since…

view full answer...

Answer 5

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Answer 6

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Answer 7

For a pair of stabilizer jacks that would have more than enough capacity that would work well on your R-Pod I would recommend the Stromberg Carlson Trailer Scissor Jacks part #JSC-24. These have a 5k capacity per jack and would do a great job as long…

view full answer...

Answer 8

There is not a fuse we carry for the 8000 Series of Fan-Tastic vent. It does use a 4 amp slow blow fuse so to make fuse access simpler you can use In-Line Fuse Holder #C58470-1 and if you need to replace the bow-tie bracket, motor, and blade the…

view full answer...

Answer 9

By far the best gooseneck ball kit for your 2019 Ford F-350 with the factory gooseneck ball hole is the B and W kit part #BWGNXA2061. The ball comes with a handle which allows you to pick it up without having to grab a greasy ball and the safety…

view full answer...

Answer 10

Yes of course. The Replacement Lippert Components Correct Track Weld-On Axle Hanger part #LC303918 you mentioned is 5" tall x 3-1/2" wide x 3-1/4" deep and the two mounting holes on the top are 1-3/4" apart on center as shown in…

view full answer...

Answer 11

M12-1.5 and 1/2"-20 threads are not going to be interchangeable. The diameter of an M12 thread is only going to be 0.4724" while 1/2" threads are going to be 0.500" in diameter. We currently only have 1/2"-20 Lug Nuts…

view full answer...

Recommended Cover for 255/70R18 Spare Tire

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching