Replacement Vinyl Window Trim Insert for Trailers and RVs

Question

Question:

I need to replace my vinyl window trim. Mine has a groove on each edge to fit around the frame. I cant see that on your trim? What trim should I get?

asked by: James S

0

Expert Reply:

The Camco RV Vinyl Trim Insert - White - 100' Long x 1" Wide # CAM25202 is designed to fit all the standard trim rails. The rails normally have the lip on either side that the vinyl tucks under. I've attached a photo of this trim to assist. This trim comes in different colors and different widths. I've linked the page to all your options to assist.

We don't have anything that fits around the frame.

expert reply by: Jason S

0

click to enlarge

Answer 1

Yes, the Camco Trim Vinyl part #CAM25202 that you referenced is the correct replacement trim piece you'd need for your camper.

view full answer...

Answer 2

All you're going to have to do to determine which trim insert you need s measure the available width inside your trim. We currently carry 3/4" #CAM25262 and a 1" trim insert #CAM25202 for you to choose from.

view full answer...

Answer 3

The color of the Camco RV Vinyl Trim Insert #CAM25202 is white that is between polar and colonial. For colonial we have the part #CAM25222. Polar is very white and Colonial is an off-white.

view full answer...

Answer 4

When replacing your vinyl molding trim you should measure the overall width of the trim. Since yours is 7/8" I recommend going with the 1" trim, and here are the available options in either White or Black: - 25 Feet: White #37210025…

view full answer...

Answer 5

I went out to our warehouse to measure the width of the Camco RV Vinyl Trim Insert #CAM25202 that you referenced and found that it is 1 inch thick.

view full answer...

Answer 6

The Camco RV Vinyl Trim Insert #CAM25202 that you referenced has an overall width of 1 inch. That's the size of rail it would fit into. I attached a picture that shows it's width for you to see as well.

view full answer...

Answer 7

The correct replacement trailer clearance light for a Bargman 99 Series is the Optronics Trailer Clearance or Side Marker Light part #MC44RB for red or part #MC44AB or amber. The mounting holes for this light are spaced 3" apart on center. It…

view full answer...

Answer 8

We do offer vinyl RV trim inserts in several colors and sizes. This material is either 1-inch or 3/4-inch wide, and is offered in colors like white #CAM25103, black #CAM25272 and beige #CAM25252. All such products are shown on the page I linked for…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Vinyl Window Trim Insert for Trailers and RVs

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching