Replacement Gooseneck Round Hitch Ball for 2004 Dodge Ram Truck

Question

Question:

Need a quality and round hitch ball 2004 dodge ram truck

asked by: Jeff

0

Expert Reply:

Based on the Curt 1" High-Rise Ball for Curt Double Lock, Flip and Store Gooseneck Trailer Hitch # C60603 you asked from, I'm assuming you have a gooseneck hitch and need a replacement hitch ball. Obviously you don't have a B&W hitch because you asked for a round ball option versus the square shank so we can at least slightly narrow it down for your 2004 Dodge Ram.

We have both Curt and Draw-Tite hitch options for you Ram, so I'll give you the part numbers for the hitch and then the ball that will work with it to help you discern your hitch.

The Draw-Tite Remov-A-Ball Gooseneck # 6300-4435 will use the Remov-a-Ball Gooseneck Hitch Ball # 5973.

The Draw-Tite Hide-A-Goose # 9464-35 will use the Hide-A-Goose # 19309 or 1 inch rise Performer ball # 19306.

If you have the Curt EZr Double Lock # C60682 then you will use # C60616 or 1 inch rise # C60603. This hitch ball with have two holes for the double pins used with this hitch.

You may need to get under your truck to see what markings are on your hitch if you can't determine a fit based on this information.

expert reply by: Jason S

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 9

Hey MIchael, some play like that is normal with the Gen-Y ball part #GY43XR so I wouldn't worry too much about it.

view full answer...

Replacement Gooseneck Round Hitch Ball for 2004 Dodge Ram Truck

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching