Dimensions of Extang Replacement Cab Seal # EX32000368

Question

Question:

Can you give me the dimensions of the Replacement Cab Seal for Extang Encore Tonneau Cover Item # EX32000368.

asked by: Doug

0

Expert Reply:

The Replacement Cab Seal # EX32000368 referenced in your question measures 68 inches long, 1 inch wide, and 7/16 of an inch thick. I have attached a short video demonstration that you can check out as well.

This is designed to replace the cab seal on Extang Encore Tonneau Covers.

expert reply by: Chris R

0

click to enlarge

Answer 1

We do sell the seals for Extang tonneau covers. Based on your description and the lock that you bought previously, it looks like you have the Extang Encore Trifold Hard Cover. The correct cab seal for the Extang Encore Trifold Hard Covers is…

view full answer...

Answer 2

According to Pace Edwards, the FM2051 is indeed a Full Metal Jack Rabbit tonneau cover. The #PE78UV sweep seal would be the correct replacement gasket, which my Pace Edwards representative has confirmed.

view full answer...

Answer 3

I reached out to my contact at Extang and was told that air may be getting underneath the Extang Trifecta 2.0 Soft Tonneau Cover #EX92830. To fix this issue, drop the tailgate and look inside the bed to see if you can see light coming through in the…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Dimensions of Extang Replacement Cab Seal # EX32000368

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching