Gooseneck Hitch Plate that Curt Gooseneck Rail Kit # C31301 Fits

Question

Question:

Can this work with the curt 61100 fixed ball

asked by: Kyle

1

Helpful Expert Reply:

The most similar gooseneck plate that the Curt rail kit part # C61301 that you referenced is designed to fit is the Curt Gooseneck Plate part # C65500. The part number # C61100 would not fit this rail kit.

expert reply by: Jameson C

1

Answer 1

The Buyers Products Gooseneck Hitch Plate #3373014981 is a multi-fit application that can be used on a cab and chassis truck. The plate would need to be bolted to your truck frame and body. Holes would be drilled through the plate, through the bed…

view full answer...

Answer 2

I have a couple options for you as I do not see any custom fit gooseneck hitches available for your 2013 Ford F-650 Cab and Chassis. First is the Buyers Products 42" x 13-1/2" Gooseneck Hitch Plate #3373014981. This plate is 42" Long x…

view full answer...

Answer 3

I wish we had a custom fit for your Sterling, but the best option we have is the Buyers Products gooseneck hitch plate part #3373014981. This all-steel assembly will need to be bolted to your truck frame and body.

view full answer...

Answer 4

I reached out to the manufacturer, Buyers Products, regarding the size of the bolts needed to install the Buyers Products 42" x 13-1/2" Gooseneck Hitch Plate with 2-5/16" Ball And Two D-Rings #3373014981. They told me that you will…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...