Trailer Hitch Compatible with 2006 VW Jetta 1.9L

Question

Question:

Will a 2004 Jetta hitch fit my 2006 Jetta 2006 VW Jetta 1.9 l

asked by: Luke

0

Expert Reply:

The 2004 VW Jetta will use the Draw-Tite Sportframe Trailer Hitch Receiver # 24748 which is not compatible with a 2006 Jetta. It was designed for the previous generation.

You instead will need the hitch # C11474 which is specifically designed to fit 2006-2014 Jetta models.

I've attached a couple of videos to assist.

expert reply by: Jason S

0

Answer 1

There are only Class I trailer hitches available for the 2006 VW Jetta, see link. I recommend the Curt #C11474. The recommended ball mount is #3593. For a 1-7/8 inch ball use #19256. For a 2 inch ball use #19258. This hitch has a 200 pound tongue…

view full answer...

Answer 2

We do not have a hitch to fit your 2006 Jetta TDI. The Curt hitch #C11474 excludes the TDI version of your Jetta. We do have trunk mounted bike racks like the Yakima FullBack 2 Bike Rack - Trunk Mount - Adjustable Arms #Y02634 that is confirmed to…

view full answer...

Answer 3

As you are looking at the Curt Trailer Hitch Receiver #C11474 and T-One Vehicle Wiring Harness #118667 for your 2006 Volkswagen Jetta TDI Sedan, Curt recommends the Ball Mount #3593. This ball mount will accept either a 1-7/8" Ball #19256 or…

view full answer...

Answer 4

We actually carry a trailer wiring harness for your 2006 Jetta that is a very easy installation. Take a look at the Custom Fit Vehicle Wiring, #118667. This is what is called a T-One harness because it plugs in line with the vehicle tail light wiring…

view full answer...

Answer 5

They basically are the same. The part #C11474 is replacing the part #C11474. Basically they made the new hitch with some minor tweaks to allow it to fit the older and newer models. Either will work great for your 2006 Volkswagen Jetta non-diesel.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Trailer Hitch Compatible with 2006 VW Jetta 1.9L

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching