Replacement Bumper Needed for 2003 Ford E-350 Utility Truck

Question

Question:

Good Evening, I was wondering if someone can help us, We have a 2003 Ford E350 Utility truck that needs a rear bumper assembly. Thank you,

asked by: Evaliz

0

Expert Reply:

We do have some Westin bumpers that will fit a 2003 Ford E-350 but I'm not sure how well they will fit with the utility truck configuration (see attached photo of inside of bumper. Also they do have a different design than the one you have in your picture. The Fey Diamondstep bumper comes in 3 different colors:

Silver Powder Coated Steel # 20105
Black Powder Coated Steel # 20107
Chrome Plated Steel # 21105

Please note that these do fall under the Prop 65 warning for California residents.

expert reply by: Jon G

0

click to enlarge

Answer 1

For your 2011 Ford E-250 we have the Westin Fey Diamondstep Rear Bumper which is offered in black part #20107, silver part #20105, and chrome part #21105. These options are all custom fit and they come with all the brackets and hardware needed to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 4

For starters, if the gross combined weight rating (GCWR) is 16,200 lbs and the gross vehicle weight rating (GVWR) is 7,000 lbs then your towing capacity is 9,200 lbs, not 10,800 lbs. The correct GCWR and GVWR figures will be found on the driver's…

view full answer...

Answer 5

For A 2002 Ford Pleasure Way Excel TD on a E-350 chassis with a V10 engine you'll need the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR that you were already looking at.

view full answer...

Answer 6

The correct Hayes brake controller install harness that fits your 2015 Ford E-450 cutaway chassis is the part #HA81788-HBC and not the one you referenced as that fits newer models.

view full answer...

Answer 7

To install a brake controller in your 2016 Ford Transit Connect tou will need to start with a 4-way (if you do not have one). For that you would want the #C56218. From there you would need to convert the 4-way to a 7-way so that you can install the…

view full answer...

Answer 8

The brake controller connector is located behind a panel just to the left of the glove compartment, as shown in the provided photo. The wiring harness adapter used will depend on the brake controller you end up using. I see that you've looked at…

view full answer...

Replacement Bumper Needed for 2003 Ford E-350 Utility Truck

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching