Tow Mirror Recommendation for 2017 Ram 2500 SLT

Question

Question:

Will slip on mirror work on 2017 2500 ram slt truck? It has the reg mirror with the blind spot mirror on outside. Thanks

asked by: Larry Y

1

Helpful Expert Reply:

We do not have any slip on styles of towing mirrors that fit your 2017 Ram 2500 SLT that has the blind spot mirror that also folds out as it's own type of tow mirror. You'd need a universal style tow mirror like the CIPA Door Mirror part # 11650-2 which attaches to the door and can telescope out for a very wide viewing angle.

I attached an install video for this on a similar 2017 Ram 1500 as yours as well.

expert reply by: Jameson C

1

Answer 1

If the factory mirrors of your 2017 Ram 2500 look like the picture I attached the best custom fit tow mirror we offer is the CIPA #CM11400 which would fit and work well. These will give you a much wider viewing angle to help while towing your fifth…

view full answer...

Answer 2

The mirrors on your 2017 Ram 2500 sure do look like the ones on the truck in the video I have linked for towing mirrors #KS80710 (minus the blind spot mirror you have). However, we have a install note stating that they will not fit SLT models. The…

view full answer...

Answer 3

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 4

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 5

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Most critical to trailer tire performance and durability are 1) proper inflation 2) observance of the tire's rated load capacity and 3) observance of the tire's speed rating. If either of these factors is off the mark then the tire will tend…

view full answer...

Answer 12

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…

view full answer...