Measuring Step Pad for Replacement When Part Number is Not Cross-Referenced

Question

Question:

I have a rubber with the number BC 5987-5i cant find the rubber replacement

asked by: David H

0

Expert Reply:

Unfortunately that part number does not cross-reference with anything I have. I also googled that part number with no results. Can you take some length and width dimensions as well as stud too stud measurements for me so I can determine compatibility based on measurements? I've linked the page to our options to assist. The pin measurements are important so I've attached a photo of the Westin # 23-0001 to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The Replacement Step Pad for Aries 3" Wide Oval Nerf Bars #AA86FR measures 6.496” apart center-to-center for the inner pins, and the two outer pins measuring 17.795” apart center-to-center. It's not uncommon for replacement pads to…

view full answer...

Answer 3

Hey Clayton, the correct Westin hardware kit for the E-Series steps part #23-2315 that fit your 2008 Dodge Ram 2500 quad cab is the part #23-231PK.

view full answer...

Answer 4

Yes, Firestone offers either their Ride-Rite Air Helper Springs #F2299 rated for up to 5,000lbs of capacity or the Ride-Rite Red Label Extreme Duty Air Helper Springs #F2701 rated for a capacity up to 7,500lbs. Do note both of these kits are still…

view full answer...

Answer 5

The step pad you are referring to is indeed a Westin pad, and is a replacement for 3" round nerf bars; I have added the photo you were referring to, and the part number for the step pad is the following: - Replacement Step Pad for Westin…

view full answer...

Answer 6

We have some pads that may work for your 5 inch Lund Running Boards. We have the Replacement Step Pad for Westin Oval Tube Steps #22-5002 that are 18 inches by 4 inches wide. The closest to 27 inches we have are the #80-0231, which are 26 inches by…

view full answer...

Answer 7

The replacement step pad you need for your Westin E-Series Nerf Bars #23-2250 is #23-0001. I've linked a video on how to install the replacement step pads.

view full answer...

Answer 8

It sounds like you need the Replacement Step Pad for Westin Platinum Series Oval Nerf Bars - Front/Rear - Qty 1 #21-0001. You can see the measurements in the photo and that there are 6 pegs, but only 5 of them use the clips to hold the pads in…

view full answer...

Answer 9

The Westin Replacement E-series Step Pad, #23-0001, measures 3-5/8, 5-5/8, 6-3/8, 3-5/8 inches from one end pin to the other. I have attached a photo showing the measurements I took for you. The best way to find the correct replacement step pads is…

view full answer...

Answer 10

We do have a 21x3 inch replacement pad. It is the Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1, #23-0001. Unfortunately this pad has 5 posts. The closest 4 post replacement pad we have is the…

view full answer...

Answer 11

To replace the step pad on a Westin E-Series Nerf Bar like the #23-1680 you'll need to use the Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1 #23-0001, which will work on any of the 4 spots…

view full answer...

Measuring Step Pad for Replacement When Part Number is Not Cross-Referenced

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching