Which Middle Jack is the Correct Replacement for Lippert 3.0 Ground Control 6-Point System?

Question

Question:

2017 KZ sidewinder 6 points 3.0 sys. Leppert Need a new Jack on driver side in middle of camper. Is the number 305 339

asked by: Ray E

0

Expert Reply:

For your Lippert Ground Control 3.0 Leveling System, the driver side middle jack replacement you need is the Replacement Left Rear Leg for Lippert Ground Control 3.0 Electric 6 Point Leveling System # LC342610 which has an outer leg that measures 17 inches or # LC305339 which is 19 inches. That measurement will give you the correct fit for your application.

expert reply by: Jason S

0

click to enlarge

Answer 1

Yes, the Replacement Right Rear Leg #LC344792 is the correct unit to replace the rear passenger side jack on your Lippert Ground Control 3.0 System. I reached out to my contact at Lippert and he said there aren't any specific torque specs that…

view full answer...

Answer 2

The overall height of the mounting plate of the Replacement I-Beam Jack Bracket for Lippert Ground Control #LC349975 is 13 inches.

view full answer...

Answer 3

Normally the SAE number isn't a reliable way to pick out replacement lenses, but we know that the #A32RB is the correct replacement for a lens marked SAE-A-P2-DOT-02 like what you have. For an all new assembly you'd want the part #MC32RB.

view full answer...

Answer 4

As someone who has knowingly overloaded a trailer out of necessity, I completely understand your thought process here, but I think I have a better option for you that will save you both time and money in upgrading to electric-over-hydraulic discs…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 12

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Which Middle Jack is the Correct Replacement for Lippert 3.0 Ground Control 6-Point System?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching