Does Charging Station for RVs # DG61030VP Draw Power Without Devices Connected

Question

Question:

What kind if any of power draw is there if no USB devices are connected?

asked by: Kevin G

0

Expert Reply:

If there isn't a USB device attached to the Charging Station for RVs # DG61030VP it will not draw any amperage at all. There isn't a light or anything else that needs power so it would be totally inactive until something is plugged into it.

expert reply by: Jameson C

0

Answer 1

The minimum mounting depth needed to install the Decor Dual USB Charging Station #DG61030VP is 1/4-inch behind the mounting surface. I measured this item in our warehouse to confirm. Please refer to the included photo.

view full answer...

Answer 2

A trailer light that only has 1 wire means that it grounds through its mounting hardware. The single wire is the power wire. The best surface to ground a light to is steel. If steel is not available in the area the light installs you can attach a…

view full answer...

Answer 3

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

view full answer...

Answer 4

14 gauge wire is used with the USB Power Outlet for RVs - 2 USB Ports #37215115. So you can connect the wires with two of the Butt Connector - PVC - for 16-14g Wire #DW05714. Then to mount it in the correct plate is the Mounting Plate for 12V Socket…

view full answer...

Answer 5

While we don't carry any chargers with a USB-C port in them the real determining factor for the charging speed is going to be based on how many amps the charger can pull. With DC wiring they don't expect you to pull a large amount of amps so…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 12

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Does Charging Station for RVs # DG61030VP Draw Power Without Devices Connected

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching