Does Thule Pull Top Ski Carrier Hardware Fit 2018 Toyota Highlander Factory Crossbars

Question

Question:

Will these clamps fit 2018 highlander factory cross bars? They are a little over 2.5” wide. Thanks.

asked by: Brendan C

0

Expert Reply:

Yes, the Mounting Kit for Thule Pull Top Rooftop Ski and Snowboard Racks # TH7520970001 does fit the factory crossbars of your 2018 Toyota Highlander.

expert reply by: Jameson C

0

Answer 1

If you have the Thule SnowPack Ski and Snowboard Carrier - 4 Pairs of Skis or 2 Boards #TH7324B (black) or #TH7324 (silver), I confirmed with Thule that you should stack the skis on top of each other with the top ski's binding pointing up and the…

view full answer...

Answer 2

The Replacement SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carriers #7521241001 or the Mounting Kit for Thule Pull Top Rooftop Ski and Snowboard Racks #TH7520970001 will be compatible with the aero style bar. Either of…

view full answer...

Answer 3

I reached out to Thule and unfortunately they do not offer replacement speed-link hardware for their Ski carriers and Part #7533998 is not compatible, as it is intended for the older FlatTop models. If you'd want to replace the carrier, I'd…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The Thule Hullavator Pro, part #TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 10

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Does Thule Pull Top Ski Carrier Hardware Fit 2018 Toyota Highlander Factory Crossbars

Product Page this Question was Asked From

Continue Researching