Availability of Tire Chain Tensioner that's All Metal

Question

Question:

Looking for a tire chain tensioner, metal not rubber that fits tire size 275/ 65-20 Thanks

asked by: Thomas A

0

Expert Reply:

The tire chain tensioner part # TCSA2 is made of all metal and is designed to tension tire chains.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The snow tires I recommend that fit your 35x12.50R20 tires are the Glacier Twist-Link Snow Tire Chains #TC3235CAM because they utilize twisted links which is going to ensure the optimum amount of grip and traction for snow and ice. These chains are…

view full answer...

Answer 2

According to the owner's manual for your 2004 GMC Sierra, tire chains cannot be used on 265/75-16 tires due to clearance issues between the chains and vehicle components. However, we understand certain states and conditions require them by law…

view full answer...

Answer 3

The Titan Chain Alloy Tractor Tire Chains part #TC0877S materials are sourced from China and assembled in the US. We currently do not carry a snow chain that fits the 16.9x32 tire that source the materials domestically.

view full answer...

Answer 4

The cam locks of the Glacier Twist-Link Snow Tire Chains #PWE2228SC that you referenced will tighten the sides of the chain and remove slack in them. This will help reduce any movement that would be there while traveling. You will still want to keep…

view full answer...

Answer 5

There are definitely tire chains that will fit the 275/55-20 tires on your 2015 Chevy Silverado 1500, but it is worth noting that if your manual says not to use chains then the risk you will be running is that there are likely low clearance…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

I am far from an expert on snowmobiles but one would have to think such a large truck with the correct tires and chains would be able to make it through up to 2' of snow assuming you have clearance on the vehicle. In regards to the type of tire…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

We have a similar set of Titan twist link tire chains that fit your tire size of 265/75-16 with the part #TC2228 but the size you mentioned would not fit so you would not want to go with them.

view full answer...

Availability of Tire Chain Tensioner that's All Metal

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching