Type of Outlet Compatible with Furrion RV Outdoor Receptacle Cover # F15RCSBSAM

Question

Question:

Does this go over a rectangle gfci style outlet with screws on the end or the old style with a screw in the middle?

asked by: Don J

1

Helpful Expert Reply:

The Furrion RV Outdoor Receptacle Cover # F15RCSBSAM referenced in your question will fit current style GFCI rectangular outlets with screws at each end.

The cover features a waterproof construction and a spring-loaded lid that will protect the outlet from moisture.

expert reply by: Chris R

1

Answer 1

The physical size of a GFCI Wall Outlet is the same whether or not it has USB ports to the best of my research so the Furrion RV Outdoor Receptacle Cover part #F15RCSBSAM for black, part #F15RCSGSAM for gray, or part #F15RCSPSAM for white should work…

view full answer...

Answer 2

The Furrion RV Outdoor Receptacle Cover - 15 Amp - Black #F15RCSBSAM does simply screw into place. It has holes that need to be drilled out and these will allow you to screw it in. This cover also comes in White #F15RCSPSAM.

view full answer...

Answer 3

If you are just looking for outlet covers then we do have options in the GFCI Outlet Cover part #37205-12215 which is black in color. We also offer the Duplex Outlet Cover part #37205-12115 but we don't carry Wirecon.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

We do have what you need to add a 7-way trailer connector to your 2018 Subaru Outback Wagon but there isn't a specific custom harness that fits. If right now the Outback has no trailer wiring at all the easiest way to add a 7-way is to start with…

view full answer...

Answer 11

I recommend installing the Curt Trailer Hitch Receiver #C13410 on your 2018 Subaru Outback. This receiver will fit with the Hollywood Racks Sport Rider SE2 Bike Rack #HR1450Z and provide you enough clearance both when folded and unfolded. This bike…

view full answer...

Answer 12

Thanks for the nice words, and on a scale of 1-10, the installation difficulty on your 2019 Subaru Outback is rated a 10 for the etrailer Trailer Hitch Receiver #e42TR. This is somewhat subjective, of course, and we have it as a higher rating…

view full answer...