What Type of Propane Tank Cover Should be Used with Stromberg Carlson Trailer Tray CC-255

Question

Question:

Is it best to remove the hard LP cover and replace it with a soft cover when using this tongue carrier? It doesnt look like you would be able to remove the hard cover to refill the tanks.

asked by: Judy G

1

Helpful Expert Reply:

It would probably be much easier to fill tanks with the Stromberg Carlson Trailer Tray Cargo Carrier # CC-255 if you had a soft cover on the tanks instead of a hard cover.

expert reply by: Jameson C

1

Answer 1

I don't think you'd have any issue removing your propane covers with the #CC-255 installed. If you check out the pictures I attached you'll see this installed on a trailer that has the white version of your cover installed. In the last…

view full answer...

Answer 2

As long as you have the generator secured on the Stromberg Carlson Trailer Tray Cargo Carrier, part #CC-255, you can run the generator while it is mounted on the carrier. I recommend using s-hook ratchet straps like part #SM54FR. These are 1-inch…

view full answer...

Answer 3

Best option for locking generators to the Stromberg Carlson part #CC-255 will be a cable lock like the #e98891 which you could route through the handles of the generators and then around the platform of the bunk. The Maximum Security Strap #TLA7751…

view full answer...

Answer 4

It might make it a little more involved to get to the LP tanks, but the Stromberg Carlson Trailer Tray Cargo Carrier #CC-255 would only provide a slight interference if any at all. Basically, like the pictures indicate there will be a tray several…

view full answer...

Answer 5

It will be a close fit but your 18" x 25" generator will fit on the tray of the Stromberg Carlson Trailer Tray Cargo Carrier #CC-255. If you look at the linked photo you can see that the very front of the tray measures 24-3/4" long,…

view full answer...

Answer 6

With the Stromberg Carlson Trailer Tray Cargo Carrier #CC-255 installed on your trailer you would still have enough room to turn on/off your propane tanks. You also would still be able to take the tanks off if you needed to as well. The tray will sit…

view full answer...

Answer 7

The BAK Revolver X4 Hard Tonneau Cover part #BAK79131 will sit about 1-1/2" to 1-3/4" below the bed rail. According to my research, the 2019 Chevrolet Silverado 1500 has bedsides which are 22" tall which means that you will have around…

view full answer...

Answer 8

I agree with you. Having the Honda generator mounted on the actual trailer would be better than a basket or other device. Using the Trailer Tray Cargo Carrier, #CC-255, is an excellent option. This carrier has a 300 pound weight capacity and the tray…

view full answer...

Answer 9

Stromberg Carlson specifically designed the #CC-255 Trailer Tray for carrying compressors, generators, cooler or other fairly large items up above the propane tanks. If the proper precautions are taken, such as frequently checking the propane…

view full answer...

Answer 10

If you check out the picture I attached you can see that when the Stromberg Carlson Bunk Adapter part #CC-255 is installed you still have really great access to the propane tanks of the RV.

view full answer...

Answer 11

As long as you secured the Tote-N-Stor securely on the Bunk Adapter part #CC-255 yes you could do what you are looking to do. There's no reason it couldn't be stored on the bunk.

view full answer...

Answer 12

The Stromberg Bunk Adapter part #CC-255 is a great solution for what you are looking for. This attaches to the frame members of your camper and gives you a platform up above the propane tanks to carry a generator. I attached a picture of this…

view full answer...