Where Does Safety Chain Attach on EcoHitch Trailer Hitch for 2019 Chevy Volt

Question

Question:

Where / how do you attach safety chains?

asked by: Rob M

0

Expert Reply:

I attached a picture that shows where to attach the safety chains on the EcoHitch part # 306-X7338. Basically you just hook the chains over the openings and you're set.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, there is a hitch for your 2018 Chevy Volt that will allow you to mount a wheel chair carrier to it. It is the EcoHitch Invisi Trailer Hitch Receiver item #306-X7338. This hitch is custom fit and bolts to your Chevy with included hardware. I…

view full answer...

Answer 2

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT94GR weights 39 pounds. The Curt Trailer Hitch Receiver #C11563 weights 27 pounds. I would recommend going with the Draw-Tite hitch #DT94GR. It will give you more options on towing trailers, and more…

view full answer...

Answer 3

The best hitch will depend on which bike rack you're using. If you have a rack compatible with a 1-1/4 inch hitch, you'll want to use the Curt #C11436 Class I hitch. If your rack is compatible with a 2 inch receiver, you'll want to use…

view full answer...

Answer 4

I spoke with EcoHitch about the EcoHitch Invisi Trailer Hitch Receiver part #306-X7338 and they stated that you'd actually run the safety chains behind the bumper from underneath to avoid them hanging down and causing damage. If you are still…

view full answer...

Answer 5

For your 2020 Nissan Kicks you'd want a hitch like the Draw Tite part #DT94GR to tow a motorcycle trailer. This would have enough capacity to tow a smaller motorcycle trailer but we don't have a hitch that would allow you to carry a…

view full answer...

Answer 6

The impact structure behind the rear bumper fascia of your 2017 Chevrolet Volt is not structurally strong enough to support a receiver. This is why instead of replacing the impact structure the available Curt #C11436, Draw-Tite #24947 and EcoHitch…

view full answer...

Answer 7

I reached out to my contact at EcoHitch to see if they have seen this issue before with the EcoHitch #306-X7201 on your Tesla and if they have any suggestions. My contact did say that the Tesla rear bumper has quite a bit of tolerance from the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Where Does Safety Chain Attach on EcoHitch Trailer Hitch for 2019 Chevy Volt

Product Page this Question was Asked From

Continue Researching