Could Ribbed Rubber Trailer Mat # 4872SM be Used on Car Ramp Door  

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

The best solution is to purchase the Swagman Bike Frame Adapter Bar for Electric, Step Through, and Cruiser Bikes #S57FR for the non-electric women's bike and any electric bike that has a step-through or alternative frame. The adapter bar will…

Wheel-mount bike racks like the Thule T2 Pro XTR #TH83JV aren't the best options for bikes with fenders for exactly the reason you mentioned. The ratcheting hooks would come down on the fender instead of the wheel which won't provide a secure…

Only certain bike racks are rated by the manufacturer for use behind RVs or trailers. This is simply because the ride at the rear of an RV is significantly rougher when compared to the rear of a standard passenger vehicle. The reason for this is that…

Hi Kat, The rubber bumpers that we offer are all 96" in length but can come in different widths. Based on the dimensions you provided i your pictures the #D3-96 is going to be the best fit, but you will have to cut it down to size.

The closest we have to match those measurements is going to be the H-Channel for Enclosed Trailer #36281-955 which has an internal width of 1.027" and a height of 2". We do also have a C-Channel #362213-955 which has an inside measurement…