Can Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWC95A17 be Partially Open

Question

Question:

Does this cover have to be opened all the way or, closed all the way, to travel down the road? Can I have it opened enough to clear my fifth wheel hitch and still be able to travel down the road with it or, partially opened? Thank you,

asked by: TERRY

0

Expert Reply:

The Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWC95A17 has a spring loaded spool which will pull the tonneau all the way open unless it's closed. Instead you'd want the UltraGroove part # 311-KRD7833 which can lock into any open position.

expert reply by: Jameson C

0

Answer 1

The cannister of the Pace Edwards JackRabbit tonneau covers like the part #311-JED7936 are 9-3/4 inches wide so that is how much bed space you would lose.

view full answer...

Answer 2

Yes. You can use the Adarac Pro Series #A4000950 with a tonneau cover like the Pace Edwards Switchblade #311-SWCA03A25, since the Pro Series mounts using the stake pockets and the Switchblade mounts inside the bed rails. I've linked a short…

view full answer...

Answer 3

The first difference between the TruXedo Sentry CT Hard Tonneau Cover #TX1545916 and the TruXedo Sentry #TX1545901 is the material. The Sentry CT's cover is made of polyester, vinyl and aluminum while the Sentry's cover includes just aluminum…

view full answer...

Answer 4

The big functional difference between the UltraGroove #311-KRFA05A28 and JackRabbit #311-JEFA05A28 is that the JackRabbit is a flush design that doesn't add any height to the top of the bed rails and the UltraGroove is a low profile cover that…

view full answer...

Answer 5

I have a great locking tonneau cover option for the 5-1/2 foot bed on your 2018 Ford F-150. As far as the Pace Edwards UltraGroove Retractable Hard Tonneau Cover #311-KRFA05A28, it comes with a passive locking solution. This means that the only way…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Richard, thanks for reaching out! The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 does take up the same space as the Curt 19419346 5th wheel bracket kit for your 2024 GMC Sierra 3500. The only way to remedy this is to use the…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...