Recommended Weight Distribution System for a 2019 Jayco Jay Flight 195RB

Question

Question:

I tow with a 2105 Acura MDX FWD. I tow this camper: https://www.rvusa.com/rv-guide/2019-jayco-jay-flight-slx-travel-trailer-floorplan-195rb-tr39862 I live in Colorado so Ill do mountains. which weight distribution/sway control system do you recommend and why? thanks,

asked by: Roy

0

Expert Reply:

The weight distribution system I recommend for your 2019 Jayco Jay Flight 195RB is the Fastway e2 Weight Distribution System part # FA92-00-0600. The reason I recommend this system for you is because of how well it functions and how easy it is to install. The Fastway e2 is one of the best systems on the market for the money and it does not require any drilling into the frame for installation like other systems can. It uses trunnion spring bars for optimal ground clearance which you will need for your Acura MDX and integrated sway control to help keep your trailer steady while in tow.

The Fastway e2 also comes with a ten year warranty. The only thing you will need to use this system is a hitch ball, part # EQ91-00-6080. I have attached a review video for you as well.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

view full answer...

Answer 3

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

view full answer...

Answer 4

There is not a factory brake controller plug-in port on your 2018 Ford Transit T250 so in order to install your existing Tekonsha Primus Brake Controller you will need to hardwire it in using the Wiring Kit #5506. This kit will provide you with the…

view full answer...

Answer 5

Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This doesn't come with…

view full answer...

Answer 6

The StabiliTrak that's built into your GMC Sierra does the same thing that the Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV does, so you'd have to disable the built in TSC to use it. Since they're the same thing,…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

We sure do! It looks like your TAB 320 S Tear Drop Camper tops out a 3,000 lbs which would give it a tongue weight range somewhere around 300 lbs depending on how you load it. For a surge brake compatible weight distribution system, I recommend the…

view full answer...

Recommended Weight Distribution System for a 2019 Jayco Jay Flight 195RB

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching