Recommended Custom Wiring Adapter for Hayes Electric Trailer Brake Controller on 2011 Ford F-150

Question

Question:

HA81790. What will I need to install this unit on a 2011 Ford F150 with factory tow package? Do I need a wiring pig tail for plug in installation. I currently have a Curt low end controller I do not like due to adjustment issues on my camper brakes. Thanks

asked by: Gary S

0

Expert Reply:

To install the Hayes Genesis Trailer Brake Controller # HA81790 on your 2011 Ford F-150 with tow package, you will use the Custom Wiring Adapter for Hayes Brake Controllers # HA81794-HBC. This harness will install to the factory wiring harness located behind the dash to the right of the steering wheel. I've attached a photo to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

This is a common issue for installing a brake controller in the 2019 Ford F-150 and the easy solution is to install the part #BRK-ELECKIT which bypasses the very mysterious brake controller power wire issue your truck has and allows your brake…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 4

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 5

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 6

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...