Trailer Hitch that Fits 2018 Chevy Malibu

Question

Question:

My 2018 Chevy Malibu has dual exhaust, which hitch should I get?

asked by: Howie L

0

Expert Reply:

The Curt hitch part # C12185 is a confirmed fit for your 2018 Chevy Malibu with dual exhaust and would work well. I attached a picture of this hitch installed on a similar Malibu with dual exhaust for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The diameter of a 4.80x8 tire is 16.1 inches and the diameter of the 5.70x8 tire is 18.1 inches. The difference in overall diameter is 2 inches. You will want to make sure you have clearance for an extra 2 inches in height. The section width of the…

view full answer...

Answer 2

The speed limit for the 4.80-8 Trailer Tire and Wheel, part #AM30020, is 65 MPH.

view full answer...

Answer 3

I do have an option for you but we recommend 3-4" from the top of the tire to the bottom of the fender and at least 1" from the inside of the tire to the outside of the frame. It seems like you are already under the recommend fender…

view full answer...

Answer 4

I attached a chart that has all of the recommended lug nut torque specs for trailer wheels. Based on your studs being 1/2 inch, your wheels being 15 inches in diameter, and your lug nuts being coned you would want to torque your lug nuts to 90-120…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Trailer Hitch that Fits 2018 Chevy Malibu

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching