Will Disc Brake Kit Work with EZ-Lube Spindle
Question:
Do you have the kit without the swing tongue? I also need bearing on front axle. My old actuator is an A60. Do you have an A60 that comes with a drum to disc conversion kit? I need one that fits inside my trailer not the kind that bolts on.
asked by: Mica L
Expert Reply:
Yes, you can use the Disc Brake Kit and Actuator T4843500 on a trailer that has a grease fitting on the end of the spindle (often known as an EZ Lube spindle). You do need to make sure that this kit is compatible with your trailer's axle capacity, brake mounting flange, bearings and grease seal are compatible.
The Disc Brake Kit T4843500 is rated for a 3,500 lb axle with a 4-bolt brake mounting flange. It uses inner bearing # L68149, outer bearing # L44649 and grease seals # RG06-050. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper such as # 301-17068 and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo I've attached to see exactly where you need to measure.
Should your current hub have the same bearings (or measurements) as the Disc Brake Kit T4843500 you would be able to use it.
I have added a link to a video review of this kit for you to check out as well.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Dexter Brake Actuator - Painted - Disc - 2-5/16" Ball - Weld On - 20,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Fabrication Coupler
- Weld-On
- 20000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Disc Brakes
- No Lockout
- Dexter
more information >
Dexter Hydraulic Brake Lines and Fittings for Single-Axle, Torsion-Axle Trailers
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 18 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Single Axle
- Dexter
more information >
Dexter Hydraulic Brake Lines and Fittings for Tandem-Axle, Torsion-Axle Trailers
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 18 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Tandem Axle
- Dexter
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Demco Hydraulic Brake Line Kit for Tandem Torsion-Axle Trailers - Drum or Disc Brakes
- Shop: Dexter Hydraulic Brake Lines and Fittings for Tandem-Axle, Torsion-Axle Trailers
- Video: Titan Hydraulic Brake Lines and Fittings Review
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Shop: Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Oil - 8 on 6-1/2 - E-Coat - 7,000 lbs
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/KodaGuard - 5,200 to 6,000 lbs
- Shop: Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet and Stainless - 6,000 lbs
- Shop: Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Trailer Wiring
- Video: Review of Hydrastar Trailer Brakes - Disc Brakes for Triple Axles - HSE7K-TR1
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Titan Trailer Brakes T4830000 Review
- Video: Dutton-Lainson Trailer Winch - Brake Hand Winch - DL14881 Review
- Search Results: trailer brake line
- Search Results: trailer jack
- Video: Dexter E-Z Flex Triple Axle Suspension Kit Installation - 2006 Jayco Select Camper
- Search Results: tandem axle
- Search Results: tandem
- Q&A: Triple Axle Disc Brake Line Kit for 29 Foot Long Boat Trailer
- Q&A: Brake Line Needed To Allow Installation of SumoSprings Trailer Springs On 2022 Grand Design Solitude
- Video: Kodiak Hydraulic Brake Line Kit Review
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Wiring Diagrams
- Q&A: Repair Kit Availability for a 5125 Valley Coupler
Mica L.
1/29/2019
Do you have the kit without the swing tongue? I also need bearing on front axle. My old actuator is an A60. Do you have an A60 that comes with a drum to disc conversion kit? I need one that fits inside my trailer not the kind that bolts on.