Replacement Spring Kit for Power Gear Jack

Question

Question:

spring for my hydralic jack retract on front of my 1999 fleetwood flair mh - Is this the same spring as on a bounder? It looks like my broken spring

asked by: Stephen K

0

Expert Reply:

While we do not have a list of parts that are on each year, make and model of motorhome, if your 1999 Fleetwood Flair has a Power Gear Jack then the Replacement Spring Kit for Power Gear Jack # LC359434 will work. You will need to confirm this is what you have on your motorhome to verify if it will work.

expert reply by: Kyle S

0

Answer 1

Currently the Replacement Return Spring Kit for Power Gear External Spring RV Leveling Jacks #LC359434 are the only available springs available for the Lippert Power Gear jacks. This spring will fit both 9,000-lb (500082, 500082H, 500082HR, 500272,…

view full answer...

Answer 2

Yes, you can replace the Replacement Spring Kit for Power Gear Jack part #LC359434 on your Power Gear Jack all by yourself so long as you have basic tools. Basically, you just need to unscrew the top bolt and then unhook the opposite end from the…

view full answer...

Answer 3

Since you have a Power Gear RV jack the correct replacement spring kit is the part #LC359434 that you referenced.

view full answer...

Answer 4

As long as you have good enough access to the jack legs you can leave them installed on your trailer when swapping the springs part #LC359434. I'd recommend putting something under the foot when the spring is off. The top bolt that Conner…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 12

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Replacement Spring Kit for Power Gear Jack

Product Page this Question was Asked From

Continue Researching