Can the Global Link Vise Lock for Cam-Action Door Latch be Keyed to an Existing Lock

Question

Question:

I currently have this door lock on my side door and will be ordering two of cam latch 295-000026 for the rear ramp door of my trailer. I would like to rekey my side door that I currently have to match the Keyed alikeinch 295-000026. Is it possible to get a rekey kit for this latch that matches the Cam-latches 295-000026 that I am ordering?

asked by: Dan

1

Helpful Expert Reply:

I would love to help but there is no such thing as a rekey kit for the Global Link RV Entry Door Locking Latch Kit part # 295-000002. The only option we can offer you to receive the same lock/key on the Global Link RV Entry Door Locking Latch Kit part # 295-000002 and both the Global Link Vise Lock for Cam-Action Door Latch part # 295-000026 would be to order them all at once while selecting the keyed alike option from the drop down menu on each page before placing them in your cart.

I wish I had a better option for you but Global Link does not provide us with any rekey kits for their locks.

expert reply by: Conner L

1

Answer 1

If you select "keyed alike" from the drop down menu on the product page of the Global Link Vise Lock Door Latch #295-000026 and then enter a quantity of 2 as well the two you'd get would be keyed the same.

view full answer...

Answer 2

We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is to go by…

view full answer...

Answer 3

I think I have a solution for you in the Global Link RV Entry Door Locking Latch Kit, #295-000021 for white or, #295-000019 for black. This latch kit measures 3.47" wide x 4.28" tall, fits doors that are 1-1/4" to 1-1/2" thick,…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

That appears to be the Aluminum Eagle wheel from Lionshead. We currently only carry this wheel in an 8 lug 16" x 7". Our most similar wheel in a 15x6 is the Aluminum Liger Trailer Wheel #LH49FR. This is similar in design and color to your…

view full answer...

Answer 6

A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…

view full answer...

Answer 7

From what I can find of your Jingu 17.5 X 6.75 tire is that it has the same wheel size and bolt pattern as the Americana Modular Wheel w/ -0.5 Offset - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 #AM22461. It also has the same max load capacity of…

view full answer...

Answer 8

I checked with Aliner for availability of key number SM103 and and they do still have some keys for that lock. You can contact them directly for a replacement key. I sent their phone contact information to you. If you ever decide to replace the whole…

view full answer...

Answer 9

There is a way for you to find out exactly where to place the center hanger of your 18 foot tandem axle trailer. If you take a look at the diagram I added, which is part of a help article I also linked on how to determine where to put your…

view full answer...

Answer 10

The price for the 1/2" Metal Loom Clamp #A0500 is for a single clamp. We do have the Clamp Kit #PT43VR which includes (20) 1/4", (8) 5/16", (6) 3/8", (4) 1/2", and (4) 5/8" clamps if you are going to end up needing a…

view full answer...

Answer 11

Yes, to use the Bauer Products Manger Door Lock for Horse Trailers #BA95FR in a right hand configuration you'd just have to flip the latch so that the locking mechanism is on the right hand side.

view full answer...