Recommended Replacement Controller for 2008 Holiday Rambler Endeavor Motorhome

Question

Question:

2008 Holiday Rambler Endeavor Motorhome Lippert Components Kwikee Step Control I have two steps that extend, a light that is on when step is on and a magnetic switch. Which controller would I need

asked by: Bill M

1

Helpful Expert Reply:

For your power step on your 2008 Holiday Rambler Endeavor, you will need the Replacement Control Module for Lippert Electric Coach Step # LC301702 based on my research. Your description sounds like a coach step and the attached photo is of a step like what I believe you have. I've also attached a video to assist.

expert reply by: Jason S

1

click to enlarge

Answer 1

I have included a picture that shows the troubleshooting steps for the Coachstep brand of RV steps. These steps cover a variety of possible issues. To me it sounds like the control module needs to be replaced, #LC301702. But performing the various…

view full answer...

Answer 2

The Replacement Control Module for Lippert Electric Coach Step Item #LC301702 will replace the control module on any Coach Step from Lippert.

view full answer...

Answer 3

If both of your Lippert Coachsteps are failing to extend it seems like you are on the money with the power or ground issue. Start with the ground wire and make sure it is connected to a clean surface or possibly relocate it if you can and that may…

view full answer...

Answer 4

The correct replacement control model for the SCS/Frigette Coach Step Controller part 202-3230 is the Replacement Control Module for Lippert Electric Coach Step part #LC301702.

view full answer...

Answer 5

The correct replacement motor for your Lippert Electric Steps 725-0042, is the Replacement Motor for Lippert Electric Coach Step #LC301695. All of the Lippert electric steps utilize #LC301695 as a replacement motor.

view full answer...

Answer 6

I have previously confirmed with the manufacturer that the correct replacement control module for Coach Step 725-0042 is the Replacement Control Module for Lippert Electric Coach Step #LC301702. I have added a link to a video review for you to check…

view full answer...

Answer 7

Can you please confirm the part number on your original control module? They all look very similar but there are internal differences that could affect functionality so I would need to confirm this first. If you in fact have the correct control…

view full answer...

Answer 8

I spoke to my contact at Lippert and they informed me that you need to check that you are getting 1.5 to 3 amps coming from the control module. If you are, then test the brake by adding power and ground to the brake leads. (polarity doesn’t matter).…

view full answer...

Answer 9

The issue you described sounds like a faulty control module. In order to replace this you will want to use the Replacement Control Module for Lippert Electric Coach Step part #LC301702 which is a direct fit for your Lippert Steps 128980. I spoke with…

view full answer...

Answer 10

I'll start this off by trying to address one of the most pertinent questions to this, it would seem. According to Lippert, the Lippert #LC301695 motor should work in the opposite direction when the polarity is reversed, so it's a little bit…

view full answer...

Answer 11

The correct replacement control module for the obsolete Lippert Coach Step 128980 double retractable step kit is part #LC301702, according to the nice folks at Lippert. If you click the provided link, you can see a video product description of the…

view full answer...

Answer 12

The clicking sound you are getting of your coach step seemingly wanting to over extend or over retract is not a motor issue but rather a control module issue. This is basically the brains of the operation and if another item wasn't working…

view full answer...

Recommended Replacement Controller for 2008 Holiday Rambler Endeavor Motorhome

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching