Will Trailer Hitch Fit 2014 Freightliner Cascadia

Question

Question:

Got 2014 freightliner cascadia looking for a car hauler trl hitch wt is 8000#

asked by: Wilfred B

1

Helpful Expert Reply:

There might be a universal, weld-on trailer hitch that fits your 2014 Freightliner Cascadia but it will depend on the width of your truck's frame. So long as the frame is no larger than 44 inches you can use the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 which is a weld-on hitch that has 16 inch brackets. It has a 16,000 lb weight capacity and 1,600 lb tongue weight capacity.

If your hitch is up to 61 inches another weld-on option is the Curt # 15903 which has a 15,000 lb towing capacity and 1,500 lb tongue weight capacity.

I have added links to the installation instructions of both hitches for you to take a look at as well.

expert reply by: Kyle S

1

Answer 1

For your 2007 Volvo 780 Tractor, you will want to look at the various heavy duty truck trailer hitches that we currently have available, such as the Draw-Tite Ultra Frame #41990-16. Because we do not have any custom-fit options available for your…

view full answer...

Answer 2

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 3

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 4

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Will Trailer Hitch Fit 2014 Freightliner Cascadia

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching