Compatibility of the Blaylock EZ lock King Pin Lock with PullRite Capture Plate Installed

Question

Question:

Will this product work with a pullrite capture plate installed?BLTL-70-40D

asked by: Klint

0

Expert Reply:

The Blaylock EZ Lock King Pin Lock for 5th Wheel Trailers - Aluminum # BLTL-70-40D has a measurement from the king pin step to the top of 1/2 inch. As long as your capture plate allows that clearance, it will be compatible.

expert reply by: Jason S

0

click to enlarge

Answer 1

It is certainly possible for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR to work on your 2020 Ford F-250 Super Duty short bed, but there are likely going to be clearance issues as these are meant for long bed trucks. That…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 6

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 7

Sag is a pretty common problem for trucks towing a 5th wheel trailer, so SumoSprings are a smart idea, and the best option for your 2021 Ram 3500 are the following: - SumoSprings Rebel Custom Helper Springs #SSR-301-47-2 The SumoSprings #SSR-301-47-2…

view full answer...

Answer 8

For a 2015 Ram 3500 we currently offer only the rear anti-sway bar with the Roadmaster Rear Anti-Sway Bar #RM34GR. This 1-1/2" thick anti-sway bar will help add to the stability of your Ram's frame and combat against body roll from turns,…

view full answer...

Answer 9

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 10

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 11

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 12

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Compatibility of the Blaylock EZ lock King Pin Lock with PullRite Capture Plate Installed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching