Front Hitch Fit for 1989 Chevrolet K2500 4WD

Question

Question:

I own a 1989 Chevrolet k2500 4wd scottsdale. My frame is 34 inches outside to outside. Will this product fit. If not do you make one that does?

asked by: David

0

Expert Reply:

Curt front-mount trailer hitch # 31042 will not fit your 4WD 1989 Chevrolet K2500's 34-inch frame width. The other option from Draw-Tite, front hitch # 65005, will fit your truck so long as it is not the Crew Cab. This hitch install will require drilling, some fascia trimming and relocation of your license plate using a bracket like # 5443.

The linked customer photo shows this item installed on a compatible truck.

expert reply by: Adam R

0

click to enlarge

Answer 1

We currently have two front mount trailer hitch receivers for your 1996 Chevrolet K1500, the Draw-Tite Front Mount Trailer Hitch Receiver part #65005 and the Curt Front Mount Trailer Hitch Receiver part #31042. They both have a 9,000 lb line pull and…

view full answer...

Answer 2

There are too many variables to determine if this Curt #31042 hitch might work with your Iron 22-515-88 base bumper with bull bar, and your suspension upgrades. This hitch is designed to work with the stock bumper and come out just below the bumper.…

view full answer...

Answer 3

We do indeed offer a front mounted receiver for a 1996 GMC 2500 K2500. I'd recommend the Draw-Tite #65005. I've provided a customer-submitted photo showing what the hitch looks like when installed.

view full answer...

Answer 4

We have a Draw Tite front hitch that fits your 1989 GMC K2500 with the #65005 but there isn't a way to adapt the #65078 to fit your truck.

view full answer...

Answer 5

In order to install the Draw-Tite front mount trailer hitch, #65005, the air deflector/fascia must be trimmed or removed on a 1998 GMC Yukon 4x4. I have included a link to the installation details for you. You will also need to determine if the front…

view full answer...

Answer 6

The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" Item #31042 is designed for the 1994 Chevrolet C/K 3500 Series trucks. The easiest way to determine if Curt Front Mount Receiver is compatible is to measure center of the mounting…

view full answer...

Answer 7

Since you measured the bolt hole dimensions on your 1999 GMC K2500 and they came out to the correct dimension of 30-1/2 inches for the front hitch part #31042 this hitch would fit and work great.

view full answer...

Answer 8

The correct Curt Front Mount Trailer Hitch Receiver for your 2007 Chevrolet Tahoe is part #C31012. The tow hooks will be able to be retained which you can see in the first attached photo. There will be an ever so slight trimming of the lower plastic…

view full answer...

Answer 9

The most economically priced front mount hitch for your 1997 Chevy 1500 4x4 that we carry is the Draw-Tite Hitch #65005. You will be able to retain your factory tow hooks with this hitch also. I attached a link to all of the winch plates we offer…

view full answer...

Answer 10

The mounting holes used to install the Curt Front Hitch, part #31042 on your 1989 Chevrolet K1500 truck are the same hole needed for the installation of the Roadmaster Base Plates, part #131-8. You would not be able to have both installed at the same…

view full answer...

Answer 11

I have included a picture. In the picture the top drawing is the Draw-Tite hitch #65005. You can see how the receiver sits just below the bumper (and will stick through the optional lower fascia piece, if present). The bottom installed picture is…

view full answer...

Answer 12

I have two front mount trailer hitch receivers for your 1995 Chevy K2500. You can choose from either the Curt Front Mount Trailer Hitch Receiver part #31042 or the Draw-Tite Front Mount Trailer Hitch Receiver part #65005. Both trailer hitch receivers…

view full answer...

Front Hitch Fit for 1989 Chevrolet K2500 4WD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching