Could Hose of Bulldog Winch Tire Inflator BDW41000 be Extended

Question

Question:

Can the length of the airline be extended / doubled by using an additional nail-gun type air hose that has NPT 1/4inch fittings? Thanks.

asked by: Larry H

0

Expert Reply:

The hose of the Bulldog Winch Compressor # BDW41000 that you referenced attaches to the compressor with standard quick connect fittings seen on most compressors. If you wanted to add hose to this you pretty easily could with standard compressor hose.

expert reply by: Jameson C

0

click to enlarge

Joe I.

7/4/2020

That Bulldog air QD male adapter coming out of the handle is too large in diameter for any of my garage air compressor attachments. Can it be unscrewed and replaced with a standard size? If not, Can you recommend the appropriate size female end QD. Seem proprietary which kinda sucks for versatility without having to customize hose fittings

Reply

John

9/30/2020

@JoeI I am not sure if this has been answered for you. But, it can't the thread pattern on the Japan Nitto style male coupler is different. I have searched the web for a fix and only thing I have found is to cut the hose and use Nitto style on one size and the standard Milton coupler on the other. I am working with another company that makes adaptors for some other portable compressors to see if they have an adaptor that will work with the Bulldog. overall this is a great compressor if the hose was different and if they had quick connects for the power cables so you wouldn't have to open the hood every time.

Reply

Answer 1

The TorkLift StableLoad Suspension Upgrade #TLA7202 is a great option for your 2019 GMC Sierra 3500 as it is designed for trucks that have factory leaf springs and an upper overload spring. The StableLoad Suspension Upgrade is going to help reduce…

view full answer...

Answer 2

The blocks on the TorkLift StableLoad #TLA7202 are 2-1/2" tall.

view full answer...

Answer 3

The Torklift StableLoad Suspension Upgrade #TLA7202 is a great option for improving the handling and reducing side-to-side sway on your 2017 GMC Sierra 3500 Denali when your truck camper is attached. These will simply bolt onto each frame-mounted…

view full answer...

Answer 4

You are going to want to trim the block down about an inch. We have seen this issue before on similar GMC trucks and if you don't trim the block down the suspension is going to feel incredibly rough. If you trim about an inch off and match the…

view full answer...

Answer 5

If your suspension is going up and down 2-3 times after hitting a bump you most likely need to replace the shocks of your truck. That will slow the rebound down quite a bit and should prevent the suspension from basically bouncing like you described.…

view full answer...

Answer 6

The TorkLift StableLoad Suspension Upgrade Kit #TLA7202 installs WITHOUT drilling or trimming on vehicles with factory leaf springs and an upper overload spring. The four springs install in place of your factory bump stops. Written installation…

view full answer...

Answer 7

I reached out to both Firestone and Air-Lift and confirmed that the air helper spring kit you have on your 2002 Chevrolet Silverado is the Air Lift Ride Control Air Helper Springs - Rear Axle #AL59501, but unfortunately the air springs for this kit…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Could Hose of Bulldog Winch Tire Inflator BDW41000 be Extended

Product Page this Question was Asked From

Continue Researching