Trailer Wiring Recommendation for 2018 Toyota Highlander

Question

Question:

What trailer wiring should I get for my 2018 Toyota Highlander?

asked by: Excellent

0

Expert Reply:

For your 2018 Toyota Highlander the brand of wiring harness we recommend the highest is the T-One or Tekonsha brand as the converter boxes of these kits are the most reliable of all of the options we offer. So if you need a 4-way you'd want the part # 118449 or the part # 22119 for if you need a 7-way.

expert reply by: Jameson C

0

Answer 1

Hi Nhia, The etrailer Trailer Hitch Receiver #e98844 is not going to come with trailer wiring so you will need to purchase it separately. For your 2017 Highlander SE I recommend the Curt #56042 if you have the factory tow package; for non-tow package…

view full answer...

Answer 2

For your 2018 Toyota Highlander the 7-way kit you'd want is the part #22119 which also comes with brake controller wiring as well. This would work great with the Redarc Tow Pro Elite brake controller part #RED24FR that you mentioned. To utilize…

view full answer...

Answer 3

For your 2018 Toyota Highlander I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118449. This will give you a converter box behind the rear interior trim panel and a 4-way flat trailer connector in that…

view full answer...

Answer 4

I took a look at the online version of the owner's manual for your 2018 Toyota Highlander and found on page 206 that the max weight rating for a trailer that doesn't have brakes is 1,000 lbs but if you do use brakes then it is 1,500 lbs for…

view full answer...

Answer 5

I would be happy to help! Starting with the trailer brake controller you will need to first have a 7-way trailer connector installed on your 2017 Toyota Highlander XLE. If you do not you can add one using the Tekonsha OEM Replacement Vehicle Wiring…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Trailer Wiring Recommendation for 2018 Toyota Highlander

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching