How to Bypass Factory Brake Controller of 2016 Ford F-350 Cab and Chassis

Question

Question:

I have a 2016 f350 cab and chassis, it has the factory brake controller but it works intermittently. I have a p3 controller but I cant find the plug, does it have one since it has the factory controller?

asked by: Nathan

0

Expert Reply:

The Tekonsha Prodigy P3 Brake Controller, # 90195 and # 3034-P, will be all that you need to bypass you factory controller. This brake controller will hook up to your 2016 Ford F350 CC and bypass the factory controller.

The Ford factory brake controller that is in the dash does not have to be removed. You will need to unplug the connector under the dash and plug in the # 3034-P adapter for the Prodigy P3 brake controller to the factory brake controller plug behind the dash.

The vehicle will need the computer flashed so it will keep from searching for the connection to the OEM brake controller in the future, eliminating any fault codes. This will usually have to be done at the Ford Dealer.

expert reply by: Jameson C

0

Answer 1

At this time the Tekonsha Prodigy P3 #90195 does not have a custom wiring harness, so you would need to hardwire a connection using Wiring Kit #5506 if you have the factory 7-way or #ETBC7 if you have the factory 4-way. If you need a replacement…

view full answer...

Answer 2

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 3

I would start by using a circuit tester, item #PTW2993 if needed, to check the wiring going to and coming from the brake controller. There are 4 wires that will need to be checked. White - Ground Red - Stoplight Switch Black - 12 Volt Constant…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

view full answer...

Answer 6

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 7

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 8

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 10

Although the Tekonsha Prodigy P3 #90195 and Primus IQ #TK90160 electric brake controllers are very similar they do have some key differences as well. For one the P3 is designed to work with electric and electric over hydraulic brake systems. The…

view full answer...

Answer 11

When towing with the Curt Echo Mobile Trailer Brake Controller #C51180 installed I do recommend having the app/software opened up on your phone during travel, however it is not required for proper operation. The ideal setup would be to have the…

view full answer...

How to Bypass Factory Brake Controller of 2016 Ford F-350 Cab and Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching