Can the Curt 7-Way Extension be Used with a PowerMax Converter to Power Trailer
Question:
Hi - I would like to purchase this extension and take the trailer side 7pin end off round connector female off it and wire that to a 45 amp 12volt converter and use the truck side end square connector male to plug into another cargo trailer to power the inside lights. The convertor I purchased is a powermax 110 to 12 volt dc. It has a positive, negative, and ground off the back of it. It plugs into a 110 source and converts that power to 12volt. Would this idea work? If so, how would I wire this extension to the positive, negative, and ground to get it power the other cargo trailers lights? The cargo trailer has a 7 pin also. I’m not worried about the turn signals and outside lights powering. Just the inside lights. Thanks for any insight you can provide.
asked by: Mike
Expert Reply:
Instead of using the Curt Extension # C56080 I recommend using the Bargman # 50-87-009. This comes with an extra 2' of wiring and it already has the female end disconnected so less work on your part!
Then the correct wires that you need are the black and white wires. Black is for power and white is for ground. Be sure to follow the instructions for your PowerMax during the installation.
Product Page this Question was Asked From
Curt Universal 5th Wheel/Gooseneck 7-Way Extension - 7' Long
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 7 Feet Long
- Universal Fit
- 7 Round - Blade
- CURT
more information >
Continue Researching
- Shop: Gooseneck Hitch
- Video: Bargman Wiring - Trailer Connectors - 50-87-004 Review
- Shop: 7-Way Super Sealed Connector w/4' Cable - Car End
- Search Results: hitch tightener
- Search Results: safety chain attachments
- Q&A: Wire Color Coding of Bargman 7-Way Super Sealed Vehicle Side Trailer Connector
- Q&A: Dimensions of B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1500
- Search Results: weld on receiver hitch
- Search Results: 7 pin connector
- Shop: Trailer Wiring Junction Box
- Shop: etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel
- Shop: Hopkins Endurance Multi-Tow 7-Way RV and 4-Way Flat Trailer Connector - Vehicle End
- Shop: Titan Chain Ratchet Tie-Down Strap with Double J-Hooks - 2" x 20' - 3,333 lbs
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Q&A: Mounting Dimensions Of The Bargman 7-Way Super Sealed Connector 50-87-004
- Q&A: Curt vs. Draw-Tite Trailer Hitch Comparison for a 2016 Subaru Outback Wagon
- Q&A: What is the Difference Between the Draw-Tite and Reese Versions of Dual Cam Sway Control
- Q&A: Trailer Receiver Hitch for Flatbed Cab and Chassis Pickups
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: Trailer Wiring
- Search Results: 25580
- Shop: Fifth Wheel Hitch