Will 7/8" Wheel Masters Lug Nut Covers # WM8019 Fit 21mm Lug Nuts

Question

Question:

Hi, I see that you WM8019 lug nut cover mentioned t fit a 2012 F550. I believe the nuts I have on that truck are actually 21mm. Have you had any issues with these not fitting correctly or is there some options to help fitment? Thanks,

asked by: Robert M

0

Expert Reply:

The closest we have to 21mm are the 7/8" Wheel Masters Lug Nut Covers # WM8019. Since this is a little larger I doubt that they will fit exact on 21mm lug nuts but if you check your lug nuts with a 7/8" socket you will be able to tell if it is too large which will, in turn, let you know if these will fit or not.

expert reply by: Jon G

0

Answer 1

If the 33 mm Wheel Masters Lug Nut Covers #WM9005-6 were too big then you may need the 7/8" Covers #WM8019, 1" Covers #WM8010 or the 1-1/16" Covers #WM8011. I'm not sure what size lugs are used for your Workhorse…

view full answer...

Answer 2

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 3

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 4

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…

view full answer...

Answer 5

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need…

view full answer...

Answer 6

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the…

view full answer...

Answer 7

I recommend replacing an entire ladder if it's damaged. You'll want to find a replacement based on the height. Such as the Stromberg Carlson #LA-401 that is 99-1/2 inches tall. They can be cut shorter to customize the length if…

view full answer...

Answer 8

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 9

In order to replace the Advent Analog Wall Thermostat ACTH11 you'll need the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners part #ACRG15. This is a digital style replacement which is what you'll need since…

view full answer...

Answer 10

Yes, you can replace your GE air conditoner with an Advent air conditioner like the Advent Air RV Air Conditioner #ACM150. Additionally, you will also need a thermostat. For that, you can use the Air Distribution Box w/ Built-In Thermostat for Advent…

view full answer...

Answer 11

While trailer axles do feature an upward bend like you are describing, there isn't a particular amount/measurement that is standard across the board. This bend in the axle is designed so that it will straighten under a trailer's loaded…

view full answer...

Answer 12

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Will 7/8" Wheel Masters Lug Nut Covers # WM8019 Fit 21mm Lug Nuts

Product Page this Question was Asked From

Continue Researching