Total Height of Timbren Suspension kit part # TNRTTNA

Question

Question:

I was wondering what the total height of this product is with bracket, spacer and rubber spring.? I am looking to see how close this product is going to be to my frame. Thanks

asked by: David W

1

Helpful Expert Reply:

The total assembled height of the Timbren kit part # TNRTTNA is 8-7/16 inches.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The Timbren Suspension Enhancement System part #TNRTTNA is a great option for a 2017 Nissan Titan XD. It should engage fully with that amount of tongue weight so there should not be any pogoing but then again, this is not something that we can really…

view full answer...

Answer 2

Yes, the Timbren Suspension Enhancement System #TNRTTNA will fit on your 2016 Nissan Titan XD with the Pro4-X package. The Pro4-X uses the same bump stops as the other trims of the Titan XD.

view full answer...

Answer 3

Yes, you can install the Timbren Suspension Enhancement System part #TNRTTNA on your 2016 Nissan Titan XD with a 3" lift. However, you need to also install multiple Timbren Spacers part #A25723-90AH00 equal to the height of your actual lift in…

view full answer...

Answer 4

To add a 5th wheel hitch to your 2016 Nissan Titan XD you will first need the Demco 5th Wheel Rail Adapter for Nissan Titan XD OEM 5th Wheel Towing Prep Package item #DM6200. This adapter attaches to the integrated gooseneck hitch that come from the…

view full answer...

Answer 5

When installing an air suspension Enhancement System on your 2022 Ford F-250 Super Duty The Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle #AL55FJ are confirmed for your vehicle. The system has a load-leveling capacity up to 7,500 pounds.…

view full answer...

Answer 6

For the type of weight that a 5th wheel trailer will be putting on the rear axle of your 2016 Nissan Titan XD I like the capacity and durability of the Timbren Jounce-Style Springs #TNRTTNA. Unlike air springs these also won't require any…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Total Height of Timbren Suspension kit part # TNRTTNA

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching