Troubleshooting Grease Seal Failure when Using Bearing Buddy Bearing Protectors
Question:
I installed new inner bearings and seals, and new bearing buddies. After some use, my boat trailer has grease around the inner wheels, but when I add grease, none comes out of the seal. Why did my seals allow grease out on the wheels. I used the boat trailer at 7000’ altitude. Did this do it?
asked by: Roger
Helpful Expert Reply:
Bearing Buddy Bearing Protectors like # BB1781 have a spring loaded pressure in their design. There are times that this pressure will cause a failing seal to leak and high altitudes would be another aspect that could cause leaking to happen. When using Bearing Buddy Protectors, I recommend at minimum using a double lipped seal but the manufacturer also has a special seal for some spindle measurements like the Spindle Grease Seal Set for LM67048 Inner Bearing and 1.781 Bearing Buddy # BB60007.
Products Referenced in This Question
Spindle Grease Seal Set for LM67048 Inner Bearing and 1.781 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.875 Inch I.D.
- 2.33 Inch O.D.
- Bearing Buddy
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1781 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.781 Inch
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Seals - BB60011 Review
- Article: Trailer Tire Sizing
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000 lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Spindle Grease Seal Set for LM67048 Inner Bearing and 1.781 Bearing Buddy
- Shop: Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit
- Shop: Trailer Wiring
- Q&A: Does The Bearing Buddy Protect the Bearing from Water
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Hydraulic Brakes and Hub/Drum Assembly for 3,500 lb Boat Trailer Axle
- Video: Hopkins Multi-Tow Trailer Connector Installation - 2022 Chevrolet Colorado
- Video: Hopkins Trailer Wiring Harness Installation - 2022 Chevrolet Colorado
- Video: etrailer Trailer Hitch Installation - 2022 Chevrolet Colorado
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: Replacement Trailer Brake Drums For Dico 15638 With ST175/80R13 Wheels and Tires
- Video: BoatBuckle Tie Down Straps - Trailer - IMF17632 Review
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - RG04-040 Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Comparing Different Hydraulic Trailer Brakes for Boat Trailer
- Q&A: How to Determine Which Drum Brakes to Get
- Q&A: Should I Paint U-Bolts to Protect Finish
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: c13176
- Search Results: spindle seal
- Search Results: vertical bunk bracket