Hub, Leaf Spring, and U-Bolt Kit for 2,000 lb Trailer Axle
Question:
Hi I am buying the Item # 20545I-EZ-72-15 can you tell me if I have all the needed components? I do need the shackle but do not see them in the size I need 4.5 Thanks APUBR-10 U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4 Long U-Bolts - APUBR-10 Remove 1 166081 Shackle Bolt with Locknut for Double-Eye Springs - 3 Long - 166081 Remove 2 e84SR 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8 Long - e84SR
asked by: Tim S
Expert Reply:
The Dexter Trailer Axle w/ Idler Hubs # 20545I-EZ-72-15 is designed to fit 2,000 lb trailer axles. If that's what you have then this will fit and the U-bolt kit part # APUBR-10 that you referenced would also work since that's what it's designed to fit.
The leaf spring part # e84SR is also a 2k axle spring but you'll want to make sure the length matches what you need too. This has an overall length of 20-3/8 inch.
Products Referenced in This Question
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- 4-1/4 Inch Long
- Dexter
more information >
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 20-3/8 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Search Results: wrap
- Search Results: leaf spring clamp
- Video: Review of etrailer 3 Leaf Double Eye Spring - e84SR
- Q&A: Replacement Leaf Springs, U-Bolts, and E-Z Flex Equalizers for a 3K 1978 Fleetwood Wilderness
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Shop: 3-Leaf Double-Eye Spring for 3,300-lb Trailer Axles - 18-5/16" Long
- Shop: Rear Hanger for 1-3/4" Slipper Spring
- Search Results: apt8
- Q&A: Can I Use Grease To Lubricate Nylon Bushings On Trailer Leaf Springs?
- Q&A: Are Bushings for Trailer Suspension Spring Hangers Required
- Q&A: What Size Wheel Studs Come On Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2K
- Q&A: Torque for Loadstar Tire With Aluminum Wheel
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Q&A: Troubleshooting Bouncy Ride and Loss of Clearance After Hanger and Leaf Spring Installation
- Q&A: How Far Apart Should Hangers Be on My Custom Built Trailer With 27" Leaf Springs?
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: leaf spring
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: 25580
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: equalizer
- Video: Timbren Axle-Less Trailer Suspension System Installation
on Trailer Suspension Parts
