Does Ultra Fab Skid Wheel Kit Part # UF48-979011 Have Weight Capacity

Question

Question:

What is the weight rating for these wheels

asked by: Steve

0

Expert Reply:

The Skid Wheels part # UF48-979011 don't have weight capacities, but instead have trailer length recommendations. This kit is designed for up to 30 foot trailer so based on that this would be what you need.

expert reply by: Jameson C

0

Answer 1

A set of scissor jacks, one placed on each side of your trailer, will do a great job of reducing side to side movement and roll when the trailer is parked. You will just want to make sure the wheels are blocked so when the jacks are down the trailer…

view full answer...

Answer 2

Yes, you can use the Ultra-Fab Skid Wheels for Low-Profile RV's #UF48-979011 on your 2016 Heartland Sundance 278TS. These wheels are designed to mount to the RV's frame to help preventing dragging and digging of the trailer. Ultra-Fab…

view full answer...

Answer 3

While we do not carry a specific V-drag weld-on bar that protects your trailer from bottoming out, we do have an option that serves the same purpose. From the specs I have on your 2010 Forest River Cherokee Grey Wolf travel trailer, it measures 29.25…

view full answer...

Answer 4

We have a few different options for your 2016 Keystone Passport Ultra Lite Grand Touring 2510RB Travel Trailer; you'll just need to measure the for the correct lift needed. The Scissor Stabilizer Jacks w/ Handle 5,000lbs - Qty 2 #TJSCHD-24 has a…

view full answer...

Answer 5

As the jacks are raised an lowered, the upper mounting plate are designed to remain level. As you can see from the photo I edited, the ends of the jack uprights have gears or teeth built into them so that the mounting plate remains level. The…

view full answer...

Answer 6

If you look at the photo I edited for you, you will be able to see all the dimensions of the mounting tabs on the top of the Ultra-Fab #UF48-979006 Scissor Jack.

view full answer...

Answer 7

For your 30 foot 5th wheel I really like the frame mount skid wheels that can swivel. For that the Ultra Fab kit part #UF48-979011 would be your best option. I attached a picture that shows these attached to a trailer frame as well. These don't…

view full answer...

Answer 8

The distance from the top of the mounting plate to the bottom of the wheel on the Ultra-Fab 4 Inch Skid Wheels, #UF48-979011, is 5-3/4 inches and for the 6 Inch wheels, #UF48-979013, 7-3/4 inches. I have attached a photo for you showing these…

view full answer...

Answer 9

Adding skid wheels to your open car trailer is indeed what I recommend to help prevent the trailer from dragging when going up a steep driveway. These are designed specifically for this very purpose and will work well. I recommend taking a look at…

view full answer...

Answer 10

Yes we do have some rollers available for your 45' RV I recommend the Ultra-Fab Steel Jumbo Roller for Trailers and RVs part #UF48-979023. This is a steel roller versus the lighter duty Ultra-Fab Skid Wheels for Low-Profile RVs up to 30' Long…

view full answer...

Answer 11

The Camco RV Refrigerator Vent Cover #CAM42163 is likely a fit for your roof vent base since it fits a base with a 5-1/4" x 24" base. These vent covers are designed specifically to fit Dometic and Norcold vents so you shouldn't have an…

view full answer...

Answer 12

Generally an RV bumper is designed to take lateral force but not the vertical force it would encounter from having skid wheels installed on it. The RV frame at the rear (near the bumper) is the best place to mount skid wheels. If there is a hitch on…

view full answer...

Does Ultra Fab Skid Wheel Kit Part # UF48-979011 Have Weight Capacity

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching