Replacement Leg for Venture Landing Gear

Question

Question:

Do you guys carry a replacement leg for a venture 900–40RU landing leg?

asked by: Mike

0

Expert Reply:

You did not mention which leg you needed but we do carry # LC119102 if you need the the Lead Leg or # LG-179014 for the follow leg.

These will only work if your outer tube is 29-1/2 inches so you do need to measure to ensure that is what the leg you are replacing measures.

expert reply by: Kyle S

0

Answer 1

The replacement lead leg for Venture landing gear is part #LC119102. The follow leg would be #LG-177201.

view full answer...

Answer 2

The Stromberg Carlson Replacement Landing Gear Motor #LG-196308 does not handle the same weight capacity as your Venture M-9000 PK so instead you can use part #LC142178. For an aluminum gearbox use part #LG-179015.

view full answer...

Answer 3

The lead leg of your landing gear is the leg that has the motor and gear box attached to it directly. The follow leg has a connecting bar that is attached to it from the lead leg to move at the same rate as the lead leg. The follow leg does not…

view full answer...

Answer 4

To determine the correct replacement landing gear for your 5th wheel trailer, you will need to measure the mounting brackets on your trailer from the underside of the top bracket to the top of the lower bracket as shown in the diagram. From there you…

view full answer...

Answer 5

I spoke with my contact at Lippert who acquired Venture and he said that repair kit #LG-146059 is the correct kit for lead leg and then part #LC146060 for the follow leg.

view full answer...

Answer 6

It is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you…

view full answer...

Answer 7

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Replacement Leg for Venture Landing Gear

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching