bing tracking image
Q & A Icon

Will the Curt # C11067 Trailer Hitch Fit a 2014 Ford Fiesta Hatchback  

Question:

I have an st180 2014 for which I need a hitch for, Im looking at the C11067 hitch, is this correct ? also does it come with 50mm ball or is that a separate item. also I would need a 7 pin type wiring kit for it . Can you help with all this please. I cant see from your website that you do the 7 pin socket or where it could be fitted. Many thanks,

0

Expert Reply:

Yes, the Curt Trailer Hitch # C11067 is a confirmed fit for your 2014 Ford Fiesta Hatchback. This doesn't come with a 50mm hitch ball but you can use one in addition to a ball mount like part # C45521. Unfortunately, we do not currently (October 2023) carry a 50mm hitch ball that is compatible with any of the drawbars. You will need a 50mm hitch ball with a 3/4 inch shank.

For wiring you would need to start with the Tekonsha T-One # 118641 which gives you a 4-Way connector for the basic trailer lighting. Then to add a 7-Way connector use the Universal Wiring Kit # ETBC7. This connects to the 4-Way and then gives you a 4-Way and a 7-Way connector. It also includes all of the wiring and connection parts you need to have a fully-functioning 7-Way. The ETBC7 kit comes with a mounting bracket but you can use the part # 18140 to keep from drilling holes.

If you are needing a 7-Way so that you can use a brake controller then I highly recommend the Tekonsha Prodigy P2 # 90885 which comes with a pigtail and mounting bracket to install it.

I have attached some videos and articles for you to check out for the installation. Please note that when I looked up the online version of your owner's manual it stated that your vehicle is not approved for trailer towing. If you are determined to tow with your Fiesta then I recommend that you ensure the trailer is very light.

expert reply by:
0
Jon G

Products Referenced in This Question







Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>