Replacement Snap Ring Jack for Boat Trailer
Question:
Hi, I would like to replace my worn out swivel jack on the my bass boat trailer. Mine is welded on and the jack portion is held in place by a c-clip. Im hoping you have some thing that I could just remove the portion held in place by the c-clip and utilize the existing welded on portion. The jack has a 2-1/2inch dia hole and slides over a post and is held in place by a c-clip. It has spring loaded pin that allows it to swivel. The pin is 3/8inch dia and the locating holes are 3inch apart. Im not opposed to by a whole new hitch and just using the portion I need. Im not sure if my sketch uploaded or not. If so, that shows the layout of the post and the holes. I did not get the distance from the center of the hole to the center of the smaller holes for the pin though. Thanks!
asked by: Scott
Helpful Expert Reply:
Thanks for the measurements. Based off these it sounds like you need the Fulton Round, Snap-Ring Swivel Marine Jack part # FTJ120W0301. This jack has a 3/8" diameter pull pin, the bolt holes are 3" apart, and the center hole is 2-1/2". This seems to match exactly what you have on your trailer now. It comes with a mounting bracket but you don't need to use this if the one you have now works but we don't offer this jack without the bracket and you can always have it for a backup. The jack has a 1,200 lb lift capacity and zinc plating for corrosion resistance.
I have attached a review video for you as well.
Product Page this Question was Asked From
Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 2K
- Q&A: Mounting Bracket Dimensions for the Fulton Round Snap-Ring Swivel Marine Jack # FTJ120W0301
- Q&A: Mounting Bracket Dimensions for Fulton Round Snap-Ring Swivel Marine Jack
- Shop: Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs
- Shop: Replacement Retaining Ring for etrailer and Ram Snap Ring Swivel Jacks
- Shop: Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Video: Review of Fulton Trailer Jack - Side Frame Mount Jack - FTJ120W0301
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer jack
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Trailer Valet JXS Trailer Jack with Footplate Review
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: hitch
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Search Results: jack
- Article: Trailer Tire Sizing
- Video: Review of Trailer Valet Trailer Jack - JXS Sidewind Trailer Jack With Adjustable Leg - TV36FR
- Shop: Suspension Enhancement
- Video: Trailer Valet JXS Trailer Jack Review
- Shop: Brake Controller
- Search Results: trailer brake controller
- Q&A: Replacement for Shelby Industries Model 5756 Boat jack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 90160
on Trailer Jack
